Difference between revisions of "SenseStage"
From Lahaag - Project wiki
Jump to navigationJump to search| Line 1: | Line 1: | ||
| − | Step 1 : configure Xbee modules if not configured | + | Step 1 : configure Xbee modules if not yet configured for SenseStage, |
| − | http://sensestage.hexagram.ca/xbee-choice-andconfiguration | + | http://sensestage.hexagram.ca/xbee-choice-andconfiguration<br> |
| − | http://docs.sensestage.eu/change-to-using-the-api-mode-of-the-xbees | + | http://docs.sensestage.eu/change-to-using-the-api-mode-of-the-xbees<br> |
Remember to set the API mode to ATAP 2 or in XCTU, 2 API ENABLE W/PPP | Remember to set the API mode to ATAP 2 or in XCTU, 2 API ENABLE W/PPP | ||
Step 2 : change firmware if needed on minibee to fit your sensor | Step 2 : change firmware if needed on minibee to fit your sensor | ||
| − | Step 3 : Install pydon | + | Step 3 : Install pydon from this page : http://docs.sensestage.eu/installation-and-use-of-the-python-hive-client |
Revision as of 12:36, 30 October 2013
Step 1 : configure Xbee modules if not yet configured for SenseStage,
http://sensestage.hexagram.ca/xbee-choice-andconfiguration
http://docs.sensestage.eu/change-to-using-the-api-mode-of-the-xbees
Remember to set the API mode to ATAP 2 or in XCTU, 2 API ENABLE W/PPP
Step 2 : change firmware if needed on minibee to fit your sensor
Step 3 : Install pydon from this page : http://docs.sensestage.eu/installation-and-use-of-the-python-hive-client
minibee pydon software sensestagedatanetwork
Step 1 : Configuring Xbee modules http://sensestage.hexagram.ca/xbee-choice-andconfiguration
