SenseStage

Step 1 : configure Xbee modules if not yet configured for SenseStage,

http://sensestage.hexagram.ca/xbee-choice-andconfiguration
http://docs.sensestage.eu/change-to-using-the-api-mode-of-the-xbees
Remember to set the API mode to ATAP 2 or in XCTU, 2 API ENABLE W/PPP

Step 2 : change firmware if needed on minibee to fit your sensor

Step 3 : Install pydon from this page : http://docs.sensestage.eu/installation-and-use-of-the-python-hive-client

minibee pydon software sensestagedatanetwork

Step 1 : Configuring Xbee modules http://sensestage.hexagram.ca/xbee-choice-andconfiguration