SenseStage

From Lahaag - Project wiki
Revision as of 08:50, 13 October 2013 by Atkn (talk | contribs)
Jump to navigationJump to search

Step 1 : configure Xbee modules if not configured yet for SenseStage,

http://sensestage.hexagram.ca/xbee-choice-andconfiguration http://docs.sensestage.eu/change-to-using-the-api-mode-of-the-xbees Remember to set the API mode to ATAP 2 or in XCTU, 2 API ENABLE W/PPP

Step 2 : change firmware if needed on minibee to fit your sensor

Step 3 : Install pydon


minibee pydon software sensestagedatanetwork

Step 1 : Configuring Xbee modules http://sensestage.hexagram.ca/xbee-choice-andconfiguration

Retrieved from "http://atkn.org/wiki/index.php?title=SenseStage&oldid=3257"